How To Remove A Motorcycle Rear Wheel

Changing a motorcycle rear wheel is an important skill to have, but it’s not always easy. Knowing how to safely and properly remove the wheel can save you time and energy when the need arises. Whether you’re replacing a damaged wheel or just performing routine maintenance, here are the steps to take to remove your motorcycle’s rear wheel.

Begin by securely lifting your bike onto a table or frame if you don’t have access to a lift. Use a jack or stand to lift the rear of the bike off the ground before disengaging the brakes. Once the brakes have been disengaged, you can start to loosen the axle nut. You’ll need a suitable socket wrench to do this. While loosening the nut, firmly hold onto the wheel to prevent it from turning. Once the axle nut is loose enough, you can slide the rear wheel off the spacer.

Next, use a spanner wrench to unscrew the caliper bolts that attach the brake calipers to the rear wheel. Carefully remove the caliper from the wheel, taking care not to damage the brake lines. At this point, you’re ready to remove the rear wheel completely. Lift the wheel off the axle and away from the motorcycle. Make sure to store the rear wheel in a safe location and keep it away from any oil or fuel sources.

By following these simple steps, you can easily remove your motorcycle’s rear wheel. Just remember to be patient, take your time, and never rush any part of the process. Doing so will help ensure both your safety and the safety of your bike. When you’ve completed the job, you’ll have gained valuable knowledge and experience to tackle any future rear wheel removal tasks.

How To Change Rear Wheel Bearings